Make Your Own Tripp Trapp Baby Set Cushion

1 year ago I was pregnant and well in my second trimester. Information technology was about time to become everything ready to welcome our little one into our home. I remember the confusion equally to which baby items we all needed to become. It tin can actually be a little overwhelming I remember – we wanted to be prepared but not go over the tiptop. Yet there was one thing we were quite clear nigh.

Nosotros e'er wanted to get quite some of our babe items second hand, either bought or borrowed. That was not just a financial decision (although it makes a huge difference), I feel that older items tend to be better made, can be more special or just add character. And it's mostly a sustainable decision – a lot of babe items are just needed for those showtime weeks or months, and it merely totally makes sense to me to borrow those things if we could!

Side notation: Now that I'm a picayune longer in this motherhood journeying I accept a much meliorate idea which things are actually needed and helpful. In retrospect sure items were just non necessarily while nosotros missed some others. I'll share more than virtually that old presently! Likewise, find my virtually used & favourite baby items for historic period 6-12 months old here !

Ane of those things we got 2nd hand is our Stokke Tripp Trapp baby chair. The Scandinavian design classic is well loved in nearly households over here. It grows forth with your child and it is pretty much indestructible. They are quite pricey to buy new, specially if you get the extra accessoires with it. Only there's lots of second manus options around – I was able to find this well used beauty for a skillful deal. It did need some dearest for certain every bit information technology was quite tired looking.

For the color, I went for a soft green colour to blend in nicely with our interior. It turned out really lovely, don't you think? The best thing is to take Ella sitting with us at the table, eating and 'chatting' along. She loves her chair!

Now, refurbishing this chair does take a bit of work. But yous'll end up with a nearly new chair, gear up for some other round of growing up. In my eyes it's well worth the effort! Information technology'southward not a complicated or hard job – anyone with a bit of patience and heart for detail can do this.

How to Refurbish a Stokke Tripp Trapp

You'll need the following:

• allen central
• onetime cloth
• sanding tool (a minor mitt held sander like this one works bully) + sanding newspaper
• water based wood primer*
• water based paint*
• optional: protective height coat*
• pigment castor/pigment roller ready

*Get some advice from your local shop to get the right primer & paint for the job and the cease you're subsequently. I went with a water based paint, which is safer to utilize around kids and doesn't have much aroma when painting (merely always pigment outside if you can or ventilate well).

Pace 1 – Have the chair apart with the allen key and carefully keep all the screws. And then clean the chair thoroughly to remove any old dirt and grease.

Step 2 – Sand the chair using a hand held sander. This is a crucial step as y'all want the primer and pigment layer to adhere properly.

If you want to stain the chair, you'll demand to sand back to the blank wood and remove all one-time paint or varnish. If you lot're opting for painting, you lot can go out some old pigment on but for a tight and shine upshot information technology'due south best to sand information technology all back. I think it'southward really worth spending that extra fleck of time at this point.

After sanding, make certain to wipe down the chair to remove any particles and dust.

Step 3 – Prime time! Make sure you utilize the correct primer that is compatible with the wood surface and the type of pigment you lot're using (water based, solvent etc). Follow the tin can's instructions for painting and drying time.

Once dry out, lightly sand using a fine grain sanding paper (you lot can do this by hand) and wipe downwards with a clammy cloth.

Step 4 – Let's pigment! Make sure to follow the instructions on the tin for application and drying time. Use a paint roller set specific for a shine finish to go the best results.

In between, allow the layers dry well and sand lightly before adding a new layer. It's better to get for multiple sparse layers than fewer thick layers. I opted for three layers of pigment to make certain the chair is durable and can take some hits. Make certain to let the pigment dry and harden out properly earlier moving on to the last pace.

Stride v – Put the chair back together and conform the height of the seat and human foot plank to suit your baby/child. Add any accessories back on, like the leather strap and cushions. Your chair is prepare to be used!

I'thou however planning to make a new cushion set, equally the ones that came with the chair needs a petty upgrade. I'll keep you posted about that one and might share a piffling how to.

Hope you are inspired to get started with a project like this. Anyone else trying to exist more minimal when it comes to kids items? Would love to know your thoughts!

pepperliselther.blogspot.com

Source: https://eatyourdailygreens.com/tripp-trapp-refurbish/

Share this post